technical data sheet tnc 50 ? panel jack coaxial end 56K405-500N5 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 fax : +49 8684 18-499 email : info@rosenberger.de page 1 / 2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/08.13/6.1 all dimensions are in mm; tolerances according to iso 2768 m-h interface according to iec 60169-17, mil-prf-39012, din en 122200 documents panel piercing b 6 material and plating connector parts material plating center contact cube aurodur?, gold plated outer contact brass flash white bronze over silver(e.g. optargen?) body brass flash white bronze over silver(e.g. optargen?) dielectric ptfe
technical data sheet tnc 50 ? panel jack coaxial end 56K405-500N5 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 fax : +49 8684 18-499 email : info@rosenberger.de page 2 / 2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/08.13/6.1 electrical data impedance 50 ? frequency dc to 10 ghz return loss ? 35 db, dc to 1 ghz ? 30 db, 1 to 2.5 ghz ? 27 db, 2.5 to 4 ghz insertion loss ? 0.05 db, dc to 4 ghz insulation resistance ? 5 x10 3 m ? center contact resistance ? 1.5 m ? outer contact resistance ? 1 m ? test voltage 1500 v rms working voltage 500 v rms power handling (at 20 c, sea level, vswr 1.0) ? 80 w @ 2 ghz - - interface only ? mechanical data mating cycles ? 500 center contact captivation: axial ? 15 n coupling test torque ? 1.7 nm recommended torque 0.46 nm to 0.69 nm environmental data temperature range -65 c to +165 c thermal shock mil-std-202, method 107, condition b corrosion mil-std-202, method 101, condition b vibration mil-std-202, method 204, condition b shock mil-std-202, method 213, condition g moisture resistance mil-std-202, method 106 rohs compliant tooling n/a suitable cables n/a weight weight 9.9 g/pce draft date approved date rev. engineering change number name date inge mhlauer 10.08.04 sa. krautenbacher 19.03.14 d00 14-0352 t. krojer 19.03.14 while the information has been carefully compiled to the best of our knowledge, nothing is int ended as representation or warran ty on our part and no statement herein shall be c onstrued as recommendation to infringe existi ng patents. in the effort to improve ou r products, we reserve the right to make changes judged to be necessary.
|
